This Duplex Hotspot comes with Stand with, Handheld stand, extra battery shelf. Hot Spot is NEW Diplex all in English with battery back us inside, built in battery charger, built on board antennas, running WSPD
This is a fantastic hotspot and works great. See your Hotspot from the other side of the radio room without any trouble.
Questions on anything please feel free to ask I am always glad to help.
Shipping in less than 24 hours
Built on a Pi 3 B
latest firmware from WSPD
A VERY LARGE 7" Display
The default bit error rate on radio is less than 5%, and the default offset is 0. If the bit error rate is more than 5%, as long as the signal can be received, it can be corrected by offset.
This Hotspot is running the WPSD.
Set Controller Mode: Duplex
Radio Frequency: Freq:144-148,219-225, (Main Band)420-475,842-950
Duplex Mode: Example: RX:438.000000 TX:433.000000
Duplex Mode: Example: RX:145.000000 TX:433.000000
Setup On Duplex: RX:432.900000 TX:439.900000
Radio/Modem Type:STM32-DVM/MMDVM_HS-Raspberry pi Hat (GPIO) or any other (GPIO board)
option don't need now; some old board need set)
Admin->Expert->Edit MMDVMHOST->RXOFFSET=0 TXOFFSET=0 (default value in pistar)
(update:2019/2 new 3225 TCXO so offset is 0)
Included:
1 Hotspot
1 Power Cube
1 Power cable usb mini
1 SD card loaded system WPSD
1 Hotspot/Radio stand